manualshive.com logo in svg

HP HP-UX SNAplus2, Administration Manual, Page: 229 / 398

Share
Download
HP HP-UX SNAplus2 Administration Manual Download Page 229

Chapter 9

229

Configuring Passthrough Services

Configuring TN Server

Motif administration program

Select

TN Server

 from the

Services

 menu on the

Node window, then select the Association Records pane
on the TN Server window and choose

New

.

Command-line administration program

Issue the following command:

define_tn3270_association

TN Server Association Record Configuration
Parameters

The following parameters are required for TN server association record
configuration:

Display LU

The name of the display LU (which must be defined on
the local node).

Printer LU

The name of the printer LU (which must be defined on
the local node). Do not specify a printer LU that has
been entered on another TN server association record.

Summary of Contents for HP-UX SNAplus2















































































































































































































































































































































































































Reviews:

No comments