HP HP 54600B, User'S And Service Manual

Page: 178 / 183

O
odd field, 3–10 to 3–11
offset
adjusting option 005, 4–39
one-channel acquisition, 2–9
Option 005, 3–2
characteristics, 5–13
offset adjustment, 4–39
replacing circuit board, 4–56
trigger system characteristics, 5–14
triggering, 3–5
troubleshooting, 4–48
verifying Vertical Output, 4-22
oscilloscope
configuration preset, 2–33
preset configuration, 2–33
oscilloscope maintenance, 4–5 to 4–21
output
vertical, 3–20
outputs
rear panel, 3–20
P
PAL, PAL-M, 3–4, 3–6, 3–11
Peak Det softkey, 2–10
peak detect, 2–10
peak to peak voltage, 2–20
performance
test record, 4–22 to 4–25
tests, 4–5 to 4–21
verification, 4–5 to 4–21
performance characteristics
horizontal, 5–5
posttrigger, 5–5
pretrigger delay, 5–5
vertical, 5–2, 5–4
period measurements, 2–16 to 2–17
phase measurement, 2–34 to 2–36
physical characteristics, 5–12
Plot
See User’s Guide for optional interface
module
Position knob, 1–10
Power requirements, 5–10
power supply
to adjust, 4–28 to 4–29
voltage measurements, 4–29
preset configuration, 2–33
Previous Menu softkey, 2–18
Print
See User’s Guide for optional interface
module
probe
attenuation factor, 1–7
compensation, 1–8
connection, 1–7
trimmer capacitor, 1–8
Probe softkey, 1–7
pulse
measurements, 2–16 to 2–18
sync, 3–7
pulse parameters
See time measurements
R
rear panel outputs, 3–20
rearming trigger, 2–8
Recall Setup softkey, 2–31
recall waveforms, 2–31
replaceable parts list, 4–63
replacement
list, 4–60, 4–63
parts, 4–57
reset setup, 2–33
reset the instrument, 2–33
rise time measurement, 2–16, 2–18
Rise Time softkey, 2–18
Roll
mode, 1–16
softkey, 1–16
Run, 2–7 to 2–8
S
sample rate, 5–9
save
setups, 2–32
waveforms, 2–31
Save to softkey, 2–31
SECAM, 3–4, 3–6, 3–11
self-calibrations, 4–31 to 4–32
self-tests, 4–46
settings
default configuration, 2–33
setup
default, 2–33
reset, 2–33
setup saving, 2–32
Show Meas softkey, 2–15, 2–17
signal
automatic display, 1–9
dc component, 1–10
noise, 2–26, 2–30
single
event, 2–8 to 2–9
trigger, 2–8 to 2–9
single shot
bandwidth, 2–9
event, 2–9
Single softkey, 2–8
Slope/Coupling key, 2–8
softkey, 1–3
See keys listed by name
Source softkey, 1–14, 2–14, 2–17, 2–20
specifications
See characteristics
status line, 1–2 to 1–3, 3–2, 3–14
Stop key, 2–7, 2–9
storage operation, 2–6 to 2–7
sub bright, 4–37
subtract waveforms, 5–3
sweep
delayed, 1–12 to 1–13, 3–14, 3–17, 5–5
main, 1–12 to 1–13, 3–14, 5–5
roll, 1–16
speed, 1–12 to 1–13, 5–5
sync
amplitude, 3–5
burst color, 3–7
pulse vertical, 3–6
pulses, 3–7
sync pulse, 3–15
T
temperature
characteristics, 5–11
warm up, 4–5, 4–27
test
vertical interval signal, 3–5
test record, 4–22 to 4–25
threshold
preset configuration, 2–33
Index
Index–3