HP 8924E, Assembly

Page: 153 / 640

153
Chapter 5, HP 8924C Performance Verification
RF Gen FM Distortion Performance Test 1
N:\mkt\MANUALS\HP8924C\ALR\24c_pt.fb
Procedure
1. Access the CONFIGURE screen.
2. Change the
RF Display
field to
Freq
.
3. Access the RF GENERATOR screen.
4. Set the
AFGen1 To
field to
FM
.
5. Set the
Output Port
field to
Dupl
.
6. Measure the FM distortion at the RF level, frequencies, deviations, and rate shown in
the PTR ( see "RF Gen FM Distortion Performance Test 1" on page 307 ) and
compare the measured distortion to the limits shown in the PTR.
AFGen2 Freq
AFGen2 To
RF Gen Freq
Amplitude
Atten Hold
Output Port
AFGen 1 Freq
AF Gen1 To
FM Coupling Audio Out
Mic Pre-Emp
Mod In To
To Screen
TX Frequency
TX Power
RF GENERATOR
AC Level
Level (-9.1dBm)
RF Freq (MHz)
Dev (kHz)
Rate (kHz)
Select AM
Select Dupl