HP 8924E, Assembly

Page: 103 / 640

103
Chapter 3, Repair
Downloading Calibration Data
N:\mkt\MANUALS\HP8924C\ALR\repair.fb
Downloading Calibration Data
Most assemblies in the Test Set require calibration data. To ensure that the Test
Set remains calibrated after an assembly is replaced, new calibration data must be
downloaded. When required, calibration data is provided on a PCMCIA memory
card that is included with the replacement assembly. Refer to
table 4, "Relating
Assemblies To Troubleshooting Aids" on page 85
, to see which modules require
calibration data.
Calibration Data Download Procedure
1. Switch the Test Set’s power off.
2. Remove the faulty assembly.
3. Install the replacement assembly.
4. Switch the Test Set’s power on.
5. Insert the memory card.
6. Press the TESTS key.
7. Set the
Select Procedure Location
: field to
Card
.
8. Set the
Select Procedure Filename
: field to:
DNLDCAL
.
9. Press the K1 key to run the test.
10. Follow the instructions on the screen.