HP 8924E, Assembly

Page: 434 / 640

434
Chapter 9, HP 8924C/E Specifications
CDMA Analyzer Specifications
N:\mkt\MANUALS\HP8924C\ALR\specs.fb
CDMA Analyzer Specifications
CDMA Average Power Measurement
To achieve the specified accuracy when measuring power at the RF IN/OUT port,
the internal signal generator’s level must be 40 dB below the measured power or
less than
−
20 dBm at the DUPLEX output port.
Input Frequency Range
• 30 MHz to 1000 MHz.
Input Connector
• RF IN/OUT Connector Only.
Measurement Bandwidth
• Provides an accurate measure of the total power for all present signals within ±2 MHz
of the specified operating frequency. If other signals are present outside of this
frequency range, reduced measurement accuracy will result.
Maximum Input Level
• +35 dBm (3 Watts continuous, 10 Watts allowable for 10 seconds per minute).
Measurement Range
•
−
10 dBm to +35 dBm.