HP 86037B, Instruction Manual

Page: 93 / 204

4-21
Remote Control
TES Parameters
TES Parameters
The tables below define the TES parameter in the database associated with
each item in the GUI. The table also defines where in the database hierarchy
the parameter is located.
The table defines parameters for a high band system. Parameters with the
“_HB” at the end are parameters that depend upon the type of HP 86037B
Chromatic Dispersion Test System (1300, 1500, or DUAL). For a Low Band
system, the “_HB” will be replaced with “_LB”. A Dual Band system will have
two parameters, one with the “_LB” extension and one with the “_HB” exten-
sion.”
The “Delta” field in the Wavelength Selection area of the Main GUI is not used
by any test and therefore is not located in the database.
The Step Wavelength field in the Calibration GUI is not used by any test and
therefore is not located in the database.
Table 4-4, “System Preferences Dialog Box,” on page 4-27
Table 4-5, “CD and Gain Measurement Settings Dialog Box,” on page 4-29
Table 4-6, “Length Measurement Settings Dialog Box,” on page 4-31
Table 4-7, “Calibration Settings Dialog Box,” on page 4-33
Table 4-8, “New Normalization Button Dialog Box,” on page 4-35
Table 4-9, “Power Monitor Setup Dialog Box,” on page 4-36
Table 4-10, “Various System Parameters,” on page 4-37