HP 86037B, Instruction Manual

Page: 113 / 204

4-41
Remote Control
Output Parameters
Output Parameters
Table 4-12 and Table 4-13 give the names of the output parameters in the
results.mdb database sorted by the type of system (single or dual band). For
a single band 1300nm system, use the single band standard (1500nm) system
names replacing the “_HB” (High Band) terms shown in the table with “_LB”
(Low Band).
Table 4-12. Output Parameters – Customer_High_Band (1 of 3)
Standard_Test_Plan Data Type Unit Description
Test_Length
CableLength Real64 km Cable length measured (average for multiples)
CableLengthMeasurements(50) Real64 km Array of length measurements for multiples
Test_Gain_Phase
AbsGDelay_HB(1,1) Real64 ps Absolute Group Delay at Stop Wavelength
Filter_AbsGDelay(1,1,1) Real64 ps Filter meas abs group delay array
Filter_Wavelength(1,1,1) Real64 nm Filter meas wavelength array
Gain_HB(1,1,1) Real64 dBm Gain meas array
MaxModFreq_HB(1,1) Real64 Hz Max mod frequency used for each test
MinModFreq_HB(1,1) Real64 Hz Min mod frequency used for each test
NumGroups Int32 Number of groups completed
NumTests Int32 Number of tests in a group completed
TauPhase_HB(1,1,1) Real64 ps Relative Group Delay
TestTime(1,1) String Start Time of each test