HP 70340A, User Manual

Page: 352 / 445

*PSC (P o w er-On Status Clear)
*PSC
0
1
The \*PSC" command enables or disables the automatic p o w er-on clearing of the Service
Request Enable (*SRE) register and the Standard Ev en t Status Enable (*ESE) register. It
also enables or disables the automatic p o w er-on presetting of the SCPI ST A T us transition
registers and enable registers.
The parameters are as follows:
0 Disables clearing of Service Request Enable (*SRE) register and Standard
Ev en t Status Enable (*ESE) register at p o w er up as w ell as p o w er-on
presetting of the SCPI ST A T us transition registers and enable registers.
1 Enables clearing of Service Request Enable (*SRE) register and Standard
Ev en t Status Enable (*ESE) register at p o w er up as w ell as p o w er-on
presetting of the SCPI ST A T us transition registers and enable registers.
The factory preset condition for the \*PSC" command is \1" (clearing enabled). Once the
*PSC v alue is c hanged, it is not aected b y pressing the 4
INSTR PRESET
5 ( 4
I-P
5) k ey or sending
the \*RST" or \SYST:PRES" commands.
Query Syntax
*PSC?
Returned format:
state <NL>
Where:
state ::= \+0" if clearing of the *SRE and *ESE registers at p o w er-up is disabled or \+1" if
clearing of the *SRE and *ESE registers at p o w er-up is enabled.
See Also
*ESE
*SRE
7-128 Programming Commands
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com