HP 70340A, User Manual

Page: 271 / 445

[SOURce[1]:]CORRection:CSET[:SELect]
2
SOURce
2
1
3
:
3
CORRection:CSET
2
:SELect
3
FDAT tableno
The \[SOURce[1]:]CORRection:CSET[:SELect]" command selects the lev el correct table that
is used to correct p o w er at the Signal Generator RF OUTPUT connector.
The parameter is as follo ws:
tableno The n um b er of the lev el correct table that is used to correct p o w er at the
Signal Generator RF OUTPUT connector. The n um b er m ust b e an in teger
from 1 to 4.
This command selects one of four lev el correct tables that are used to correct p o w er at the
Signal Generator RF OUTPUT connector.
If a table n um b er en try is made that is not within the allo w able range, the lev el correct table
en try is rejected and no action is taken b y the Signal Generator. Pressing the 4
INSTR PRESET
5
( 4 I-P 5) k ey selects lev el correct table n um b er 1.
Notes
1. The \[SOURce[1]:]CORRection:CSET[:SELect]" command is used to select
the lev el correct table that is used to correct p o w er at the Signal Generator
RF OUTPUT connector. The \MEMory:T ABLe:SELect" command is used
to select a table for data loading.
2. If y ou attempt to use a lev el correct table that has an error, an error
message is generated and no correction is applied to the Signal Generator
RF OUTPUT connector.
Query Syntax
2
SOURce
2
1
3
:
3
CORRection:CSET
2
:SELect
3
?
Returned format:
FDA T tableno <NL>
Where:
tableno ::= The lev el correct table curren tly selected to correct p o w er at the Signal
Generator RF OUTPUT connector.
See Also
MEMory:T ABLe:SELect
[SOURce[1]:]CORRection:CSET:ST A T e
[SOURce[1]:]CORRection[:ST A T e]
T o Use the Lev el Correct Routine
Programming Commands 7-47
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com