HP 70340A, User Manual

Page: 302 / 445

[SOURce[1]:]PULSe:FREQuency:STEP
2
SOURce
2
1
3
:
3
PULSe:FREQuency:STEP
2
:INCRement
3
8
>
>
<
>
>
:
incr
MAXimum
MINimum
DEFault
9
>
>
=
>
>
;
The \[SOURce[1]:]PULSe:FREQuency:STEP" command selects the incremen t v alue for pulse
rep etition frequency .
The parameters are as follows:
incr Sets the incremen t v alue for pulse rep etition frequency (PRF). The allo w able
range for the parameter is 0.001 Hz to 3.2999975 MHz.
MAXimum Sets the pulse rep etition frequency incremen t v alue to its maximum allo w able
v alue.
MINim um Sets the pulse rep etition frequency incremen t v alue to its minimum allo w able
v alue.
DEF ault Sets the pulse rep etition frequency incremen t v alue to its default (preset)
v alue.
When the \UP" or \DO WN" parameters are used with the
\[SOURce[1]:]PULSe:FREQuency" command, the pulse rep etition frequency will b e
increased or decreased b y a step size set with the \[SOURce[1]:]PULSe:FREQuency:STEP"
command.
If a pulse rep etition frequency incremen t v alue en try is made that is not within the allo w able
parameter range, an error message will b e generated and the parameter will b e set to either
its maxim um or minimum limit. The preset v alue for the pulse rep etition frequency incremen t
v alue is 100 Hz.
The resolution for the PRF incremen t v alue is 1 MHz. En tries with a resolution low er than 1
MHz are rounded to the nearest MHz.
Query Syntax
2
SOURce
2
1
3
:
3
PULSe:FREQuency:STEP
2
:INCRement
3
?
2
4
MAXimum
MINimum
DEFault
3
5
Returned format:
incr <NL>
Where:
incr ::= The curren t pulse rep etition frequency incremen t v alue if no argumen t is sp ecied.
incr ::= The maximum pulse rep etition frequency incremen t v alue that can b e set if the
MAXimum argumen t is sp ecied.
incr ::= The minimum pulse rep etition frequency incremen t v alue that can b e set if the
MINim um argumen t is sp ecied.
7-78 Programming Commands
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com