![background image](http://html1.mh-extra.com/html/horiba/jobin-yvon-synapse/jobin-yvon-synapse_user-manual_2162296084.webp)
Appendix C: Performing Routine Procedures with SynerJY
74
Independent Data Acquisition
To use the AUX IN as an independent data acquisition channel:
1.
Make sure the detector is configured in SynerJY or the SDK as a
Single Channel
Detector
(refer to the hardware configuration procedures of your software
documentation).
2.
Start SynerJY and open the
Experiment Setup
screen.
3.
The Aux Port will appear as an option in the detectors list in
Experiment Setup
and
Data Preview
. Click the
Active
check box to activate the Aux Port.
4.
Select the
Experiment Type
and enter any additional experiment parameters.
5.
Click the
Advanced
button to view the
Single Channel Detector Advanced
Parameters
screen. Select the proper
Units
and
Gain
settings. Click
OK
to close
the window.
6.
Click
Run
to start the experiment.
Summary of Contents for JOBIN YVON SYNAPSE
