![background image](http://html1.mh-extra.com/html/horiba/jobin-yvon-synapse/jobin-yvon-synapse_user-manual_2162296015.webp)
5
Chapter 2: System Requirements
Synapse CCD systems have minimum system requirements that are necessary for
successful operation and optimum performance. This section covers issues related to
system attributes such as input power, physical environment, ventilation,
grounding/safety, host computer requirements and general maintenance. The user is
encouraged to read this chapter in its entirety prior to installing and powering up the
detection system.
Input Power Requirements
The Synapse operates from universal AC single-phase input power over the range of 85
to 264 V AC with a line frequency of 47 to 63 Hz. This AC input power is applied to a
two-pole fusing power entry module located on the rear panel of the power supply unit.
This module incorporates two 5 x 20 mm IEC approved, 2.0 A, 250 V, ceramic slow
blow fuses (Cooper Bussman P# BK/GDC-2A or equivalent) to protect against line
disturbances/anomalies outside the system’s nominal operating power range.
Environmental Requirements
•
Storage temperature from -25
°
C to +55
°
C
•
Operating ambient temperature range +25
°
C
±
5
°
C
•
Relative humidity
≤
80% non-condensing
Ventilation Requirements
Fans are incorporated in both the power supply unit and detector head to cool the
enclosed electronics and maintain optimum system performance. Care should be taken to
ensure that the ventilation slots on both the detector head and power supply unit are free
from obstruction in order to maintain an adequate level of air flow for proper operation.
Keep a minimum distance of 2 inches between the vents of the equipment and any walls
or surrounding equipment.
Summary of Contents for JOBIN YVON SYNAPSE
