![background image](http://html1.mh-extra.com/html/horiba/jobin-yvon-synapse/jobin-yvon-synapse_user-manual_2162296026.webp)
Detector System Installation
16
Connecting Electrical Interface Cables
1.
Using the power cable (JY# 400735), connect the power supply unit (P/N
354010) to the 16-pin circular Lemo connector of the detector head.
2.
Connect the female end of the power cord (P/N 98015 for 110 V or P/N 98020 for
220 V) to the power supply.
3.
Plug the wall outlet end of the power cord into a properly grounded outlet to
provide a chassis-to-earth ground.
4.
Locate a USB 2.0 port on your computer and connect the USB communications
cable (P/N 980076) (A end) to the computer.
5.
Connect the other end of the USB cable (B end) to the USB 2.0 interface located
on the back panel of the detector head.
6.
Connect the BNC shutter cable to the BNC Shut port. Connect the remaining end
of the BNC receptacle to the spectrograph.
Note
: The first time that the unit is connected to the
computer, Windows
®
will detect a new USB
device and automatically install the appropriate
driver (see Chapter 4: Initial Power-up and
Operation).
Note
: The Synapse detector head and power supply
unit both incorporate a 16-pin Lemo connector,
which only allows for a straight, spring loaded
insertion push and pull action when respectively
connecting and disconnecting the power cable.
Never attempt to turn or rotate the Lemo
connectors associated with the power cable
during the attachment process to either the
Synapse detector head or power supply unit, as
this action could permanently damage said
interface.
Summary of Contents for JOBIN YVON SYNAPSE
