![background image](http://html1.mh-extra.com/html/horiba/jobin-yvon-synapse/jobin-yvon-synapse_user-manual_2162296012.webp)
System Description and Specifications
2
Table I.
System Level Specifications for the Synapse CCD Detection System
Specifications
System Parameter
Units / Description
Sensor
Temperature
-70
°
C (203 K) @ T
A
= +20
°
C
Resolution Step Size
0.1
°
C
Operating
Temperature
Long Term Stability
± 0.1
°
C
Noise
See Notes 1 and 2
Non-Linearity
< 0.4% @ 20 kHZ
< 1 % @ 1 MHz
Full Well Capacity
See Notes 1 and 2
Effective Dynamic Range
See Notes 1 and 2
Dark Current
See Notes 1 and 2
Pixel Processing
ADC Precision
16 bit
ADC Dynamic Range
65, 535 maximum
Data Conversion Speed
20 kHz and 1 MHz programmable via software
Gain Settings
High sensitivity, best dynamic range, and high light programmable via
software (See Note 3)
Binning and ROI
Supports flexible binning patterns and areas programmable via
software
Exposure Time
0.001 s minimum to 49.71 days maximum
Vertical Clock Speeds
8 µs to 36 µs programmable via software, See Note 2
Electrical Interfaces
Computer Interface
USB 2.0
Inter-Integrated Circuit (I
2
C) Bus
Two-wire, synchronous, serial interface
Standard Mode: 100 kb/s Fast Mode: 400 kb/s
Voltage Input
Range
+/- 10 V, +/- 1 V, +/- 0.1 V, and +/- 0.01 V programmable via
software
Current Input
Range
+/-10 µA, +/- 1 µA , +/- 0.1 µA, and +/- 0.01 µA programmable via
software
Gain Settings
Four gain settings of 1/10/100/1000 programmable via software
Auxiliary Analog
Input Channel
ADC Resolution
16 bit
External Trigger Input (TTL In)
TTL level signal, programmable rising/falling edge triggering via
software
TTL Output (TTL Out)
TTL level signal, configurable output and polarity via software
Shutter Coil Resistance
12
Ω
Shutter Pulsed Voltage to Open
+60 V DC
Shutter Hold Voltage
+5 V DC
Shutter Output
Excitation Drive
Operating Frequency
40 Hz maximum rep rate
Power Requirements
Input Line Voltage
85-264 V AC continuous / universal
Input Line Frequency
47 – 63 Hz
Input Power
110 W typical
Optical Distance from Sensor to Front Flange
Optical Distance
13.87 mm (.546 in)
Mechanical
Detector Head
178 mm (7.02 in), 113 mm (4.45 in), 113 mm (4.45 in)
Dimensions
(L x W x H)
Power Supply Unit
195 mm (7.67 in), 130 mm (5.10 in), 94 mm (3.70 in)
Detector Head
2.108 kg (4.52 lb)
Weight
Power Supply Unit
1.650 kg (3.18 lb)
Summary of Contents for JOBIN YVON SYNAPSE
