GPS
-
NTP
T
IME
S
ERVER
8030HEPTA/GPS
8030HEPTA/GPS GPS - NTP Time Server with 2x 10/100/1000 MBit LAN Interface - V04.00
10 / 178
hopf
Elektronik GmbH
Nottebohmstr. 41
• D-58511 Lüdenscheid • Tel.: +49 (0)2351 9386-86 • Fax: +49 (0)2351 9386-93 • Internet: http://www.hopf.com • E-Mail: [email protected]
A superior security
is guaranteed via available coding procedures such as symmetric keys,
autokey and access restrictions and deactivation of non-used protocols.
Different
Management and Monitoring Functions
are available
as options
(e.g. SNMP,
SNMP-Traps, E-mail notification, Syslog-messages including MIB II and private Enterprise
MIB).
The Time Server 8030HEPTA/GPS currently has unlockable features that are described in
chapter 4.5 Activation of Functions (Activation Key):
•
SINEC H1 time datagram
•
Static Routing Table
•
Alarming and management features
•
Network Interface Bonding/Teaming
•
IEC 62439-3 Parallel Redundancy Protocol (PRP)
•
IEEE 802.1Q Tagged VLAN
•
IEEE 1588 Precision Time Protocol (PTP)
A few other basic functions of the Time Server 8030HEPTA/GPS:
•
The Time Server 8030HEPTA/GPS operates as
NTP Server with Stratum 1
•
Easy operation via
WebGUI
•
LCD-Display (2x40) and Status LEDs on the front panel
•
Sync status output
via optical coupler
•
High freewheel accuracy
provided by GPS-supported regulation of the internal
quartz basis
•
Completely
maintenance-free
system
•
SyncOFF Timer
(reception failure bypassing) for operation free of fault messages
even based on difficult reception conditions
•
Redundant
multiple validation
of the synchronization signal for an error-free and leap
free signal evaluation
•
Maintenance-free, buffered
backup clock
for at least three days
Software supplied:
•
hmc
(
hopf
Management Console) Software