HTTP/HTTPS
W
EB
GUI
–
W
EB
B
ROWSER
C
ONFIGURATION
I
NTERFACE
8030HEPTA/GPS GPS - NTP Time Server with 2x 10/100/1000 MBit LAN Interface - V04.00
67 / 178
hopf
Elektronik GmbH
Nottebohmstr. 41
• D-58511 Lüdenscheid • Tel.: +49 (0)2351 9386-86 • Fax: +49 (0)2351 9386-93 • Internet: http://www.hopf.com • E-Mail: [email protected]
8.3.2.5 Routing (Activation Key necessary)
Additional static routes can be configured if the module is not only used in the local sub net
and if connection cannot be established via the configured standard gateway.
The gateway / gateway host need to be in the local sub-network range of the module in order
to use the static routes.
The parameterization of this feature is a critical process as an incorrect
configuration may lead to considerable problems on the network!
WebGUI with Routing activated
The image above shows every configured route of the base system routing table as well as
the user’s defined static routes.
The module cannot be used as a router
!
Select
Use Route File
to set whether the routing configuration set under
User Defined
Routes
should be used, or routing configuration using a routing file.
If IPv6 routes are required, the routes must be made using the settings in
Chapter 8.3.2.6 Routing File
