hopf Elektronik GmbH 8030HEPTA/GPS Technical Manual Download

Page: 109 / 178

HTTP/HTTPS

GUI

–

ROWSER

ONFIGURATION

NTERFACE

8030HEPTA/GPS GPS - NTP Time Server with 2x 10/100/1000 MBit LAN Interface - V04.00

109 / 178

hopf

Elektronik GmbH

Nottebohmstr. 41

• D-58511 Lüdenscheid • Tel.: +49 (0)2351 9386-86 • Fax: +49 (0)2351 9386-93 • Internet: http://www.hopf.com • E-Mail: [email protected]

8.3.7.1 Time and Status

Current Sync Source Time

This area indicates the current time and date of the Sync Source. Both the local and UTC time
are displayed.

In theory, depending on the synchronization status of the Sync Source,
the time displayed here can differ from the NTP time since two independ-
ent time systems are involved.

Announcements

The display fields LEAP SECOND and STD



DST announce a corresponding event to the

next hour (insertion of a leap-second or rather switch-over of summer/winter time).

Sync Source Status

Display of the actual status of synchronization of the Sync Source with these possible values:

SYNC

Time synchr Quartz regulation started/running

SYOF

Time synchr SyncOFF running

SYSI

Time synchronized as simulation mode
(without actual GPS reception)

QUON

Quartz/Crystal time + SyncON running

QUEX

Quartz/Crystal time (in freewheel after synchronization failure



Board was already synchronized)

QUSE

Quartz/Crystal time after reset or manual setting

INVA

Invalid time

Summary of Contents for 8030HEPTA/GPS



















































































































































































Search results

Summary of Contents for 8030HEPTA/GPS

Reviews:

Related manuals for 8030HEPTA/GPS

Brands by name

Popular brands

hopf Elektronik GmbH 8030HEPTA/GPS, Technical Manual

Search results

Summary of Contents for 8030HEPTA/GPS

Reviews:

Related manuals for 8030HEPTA/GPS

Brands by name

Popular brands