hopf Elektronik GmbH 8030HEPTA/GPS Technical Manual Download

Page: 69 / 178

HTTP/HTTPS

GUI

–

ROWSER

ONFIGURATION

NTERFACE

8030HEPTA/GPS GPS - NTP Time Server with 2x 10/100/1000 MBit LAN Interface - V04.00

69 / 178

hopf

Elektronik GmbH

Nottebohmstr. 41

• D-58511 Lüdenscheid • Tel.: +49 (0)2351 9386-86 • Fax: +49 (0)2351 9386-93 • Internet: http://www.hopf.com • E-Mail: [email protected]

8.3.2.7 Management (Management-Protocols

– HTTP, SNMP, SNMP-Traps, etc.)

Protocols that are not required should be disabled for security reasons. A correctly configured
module is always accessible via the web interface.

Changes to the availability of a protocol (enable/disable) take effect immediately.

For SNMP functionality an activation key is necessary.

If by mistake all protocol channels become "disabled", the SSH channel is
automatically "enabled" after the attempt to save.

After a Factory Default the HTTP and SSH channels are "enabled".

These service settings are valid globally! "Disabled" Services are not exter-
nally accessible and are not made externally available by the module!

Summary of Contents for 8030HEPTA/GPS



















































































































































































Search results

Summary of Contents for 8030HEPTA/GPS

Reviews:

Related manuals for 8030HEPTA/GPS

Brands by name

Popular brands

hopf Elektronik GmbH 8030HEPTA/GPS, Technical Manual

Search results

Summary of Contents for 8030HEPTA/GPS

Reviews:

Related manuals for 8030HEPTA/GPS

Brands by name

Popular brands