hopf Elektronik GmbH 8030HEPTA/GPS Technical Manual Download

Page: 47 / 178

HTTP/HTTPS

GUI

–

ROWSER

ONFIGURATION

NTERFACE

8030HEPTA/GPS GPS - NTP Time Server with 2x 10/100/1000 MBit LAN Interface - V04.00

47 / 178

hopf

Elektronik GmbH

Nottebohmstr. 41

• D-58511 Lüdenscheid • Tel.: +49 (0)2351 9386-86 • Fax: +49 (0)2351 9386-93 • Internet: http://www.hopf.com • E-Mail: [email protected]

8.2.3 Enter or Changing Data

It is necessary to be logged on as one of the users described above in order to enter or change
data.

8.2.3.1 Changing of Data in 8030HEPTA (WebGUI: Device)

All changeable data, except those in GPS SYNC SOURCE tab, are saved in Module
8030HEPTA. For these data the value saving is divided into two steps.

For a permanent saving the modified value

must

first be accepted with

Apply

from the module

and then be stored with

Save

. Otherwise the modifications get lost after a reboot of the module

or switching the system off.

After an entry with

Apply

is made, the configured field is marked with a star ' * '. This means

that a value has been entered or changed but not yet been stored in the flash memory.

Meaning of the symbols from left to right:

No. Symbol

Description

Apply

Acceptance of changes and entered data

Reload

Restoring the saved data

Save

Fail-save storage of the data in the flash configuration

Summary of Contents for 8030HEPTA/GPS



















































































































































































Search results

Summary of Contents for 8030HEPTA/GPS

Reviews:

Related manuals for 8030HEPTA/GPS

Brands by name

Popular brands

hopf Elektronik GmbH 8030HEPTA/GPS, Technical Manual

Search results

Summary of Contents for 8030HEPTA/GPS

Reviews:

Related manuals for 8030HEPTA/GPS

Brands by name

Popular brands