hopf Elektronik GmbH 8030HEPTA/GPS Technical Manual Download Page 71

Page: 71 / 178

HTTP/HTTPS

GUI

–

ROWSER

ONFIGURATION

NTERFACE

8030HEPTA/GPS GPS - NTP Time Server with 2x 10/100/1000 MBit LAN Interface - V04.00

71 / 178

hopf

Elektronik GmbH

Nottebohmstr. 41

• D-58511 Lüdenscheid • Tel.: +49 (0)2351 9386-86 • Fax: +49 (0)2351 9386-93 • Internet: http://www.hopf.com • E-Mail: [email protected]

8.3.2.7.1 SNMPv2c / SNMPv3 (Activation Key required)

Both protocols SNMPv2c and SNMPv3 are supported and can be configured and enabled
independently from each other.

System Location and System Contact are global settings and are valid for both protocols
(SNMPv2c / SNMPv3).

In order to disable SNMPv2c both fields

SNMP Read Only Community

and

SNMP Read

Write Community

must remain empty.

SNMPv2c

SNMPv2c enabled

SNMPv2c disabled

Read Only Community:

set (e.g. public)

empty

Read/Write Community:

set (e.g. secret)

empty

In order to enable SNMPv3 the following fields must be set:

SNMPv3

Description

Security Name:

SNMPv3 is enabled (identical to the username)

Access Rights:

Equivalent to the Read/Write Communities in SNMPv2c

Authentication Protocol:

Authentication (MD5 or SHA Hash)

Privacy Protocol:

Encryption (DES or AES Algorithm)

There are three security levels in SNMPv3 that can be adjusted by the removal of the pass-
phrases:

SNMPv3

noAuthNoPriv

authNoPriv

authPriv

Authentication Passphrase:

empty

set

Privacy Passphrase:

empty

set

Right now only one user is supported.

Summary of Contents for 8030HEPTA/GPS



















































































































































































Search results

Summary of Contents for 8030HEPTA/GPS

Reviews:

hopf Elektronik GmbH 8030HEPTA/GPS, Technical Manual, Page: 71 / 178

Search results

Summary of Contents for 8030HEPTA/GPS

Reviews: