LCD-D
ISPLAY WITH
P
USHBUTTON
–
F
UNCTION
8030HEPTA/GPS GPS - NTP Time Server with 2x 10/100/1000 MBit LAN Interface - V04.00
37 / 178
hopf
Elektronik GmbH
Nottebohmstr. 41
• D-58511 Lüdenscheid • Tel.: +49 (0)2351 9386-86 • Fax: +49 (0)2351 9386-93 • Internet: http://www.hopf.com • E-Mail: [email protected]
7.2.3 Standard Display with Additional Information
In the standard display further systemically significant information/conditions are displayed as
soon as they occur.
U T C 1 6 : 2 5 : 5 8 G P S S Y S T E M - S T A T U S :
T U 1 2 / J A N / 2 0 1 6 T : 0 0 S y n c S o u r c e - E R R O R
Active additional information automatically leads to the activation of the backlight.
Supplementary information is indicated alternating to the standard content of the display. Such
additional information include following details/conditions:
1. Announcement active (see
Chapter 7.10 Announcements (Summertime / Leap
2. Sync Source ERROR active (see
Chapter 7.9 Sync Source ERROR
3. An Image-Update of Module 8030HEPTA is active
4. A H8-Update of the Sync Source is active
7.3
GENERAL ERROR
Should a failure occur within the system not ensuring a defined and safe operation of the Time
Server 8030HEPTA/GPS anymore this is indicated via the LCD-Display.
If there is an active GENERAL ERROR, the backlight is activated.
If such an error occurs it is recommended to disconnect the system from power for 30 seconds
and then turn it on and put it into operation again. If the failure occurs again after this process,
the system needs to be sent for repair or rather contact the
hopf
Support with the appropriate
failure report (see
Chapter 10.2 Support by Company hopf
Example:
G E N E R A L - E R R O R : N O D A T A F R O M S Y N C - S O U R C E
T u r n O F
F / O N p o w e r m a y s o l v e t h e p r o b l e m
