hopf Elektronik GmbH 8030HEPTA/GPS Technical Manual Download

Page: 15 / 178

YSTEM

TRUCTURE

8030HEPTA/GPS GPS - NTP Time Server with 2x 10/100/1000 MBit LAN Interface - V04.00

15 / 178

hopf

Elektronik GmbH

Nottebohmstr. 41

• D-58511 Lüdenscheid • Tel.: +49 (0)2351 9386-86 • Fax: +49 (0)2351 9386-93 • Internet: http://www.hopf.com • E-Mail: [email protected]

2.2.3 Reset-(Default) Button

The Reset-(Default) Button is accessible with a thin object
through the small drilling in the front panel next to the "Reset" in-
scription" (see

Chapter 4.3 Reset-(Default) Button

2.2.4 Status LEDs (TS/Error/Operation)

TS-LED
(Green)

Time service of the Time Server
8030HEPTA/GPS

Standard

, running

Off

Not or partially not running

ERROR-LED
(Red)

Description

Off

Standard case

system 8030HEPTA/GPS is working.

3Hz flashing

Fail-safe basic parameterization is not
available (emergency operation mode)

Primary CPU of system 8030HEPTA/GPS
does not show any activity.

Operation-LED
(Green)

Description

Standard case

system 8030HEPTA/GPS is working

1Hz flashing

System 8030HEPTA/GPS is booting the
operating system.

3Hz flashing

A firmware update (image) of system
8030HEPTA/GPS is being executed.

Off

System 8030HEPTA/GPS is

not

ready for

operation.

2.2.5 USB-Port (Host)

On specific problems the USB connection can be used for a sys-
tem recovery after consulting the

hopf

Support.

Summary of Contents for 8030HEPTA/GPS



















































































































































































Search results

Summary of Contents for 8030HEPTA/GPS

Reviews:

Related manuals for 8030HEPTA/GPS

Brands by name

Popular brands

hopf Elektronik GmbH 8030HEPTA/GPS, Technical Manual

Search results

Summary of Contents for 8030HEPTA/GPS

Reviews:

Related manuals for 8030HEPTA/GPS

Brands by name

Popular brands