hopf Elektronik GmbH 8030HEPTA/GPS Technical Manual Download Page 132

Page: 132 / 178

HTTP/HTTPS

GUI

–

ROWSER

ONFIGURATION

NTERFACE

8030HEPTA/GPS GPS - NTP Time Server with 2x 10/100/1000 MBit LAN Interface - V04.00

132 / 178

hopf

Elektronik GmbH

Nottebohmstr. 41

• D-58511 Lüdenscheid • Tel.: +49 (0)2351 9386-86 • Fax: +49 (0)2351 9386-93 • Internet: http://www.hopf.com • E-Mail: [email protected]

8.3.8.4.6 Output inverted

All outputs stated in the system manuals of the according devices are related to the DEFAULT
setting: Output not inverted.

If nevertheless the inverting of the output signal has to be configured the "Output inverted"
checkbox has to be enabled.

8.3.8.4.7 Special Configuration

If used, the correct settings are described in the additional system manual of the customer-
specific device.

Otherwise for S1-S8 the DEFAULT-setting (all checkboxes disabled) should not be changed
due to compatibility reasons.

Summary of Contents for 8030HEPTA/GPS



















































































































































































Search results

Summary of Contents for 8030HEPTA/GPS

Reviews:

hopf Elektronik GmbH 8030HEPTA/GPS, Technical Manual, Page: 132 / 178

Search results

Summary of Contents for 8030HEPTA/GPS

Reviews: