hopf Elektronik GmbH 8030HEPTA/GPS Technical Manual Download

Page: 110 / 178

HTTP/HTTPS

GUI

–

ROWSER

ONFIGURATION

NTERFACE

8030HEPTA/GPS GPS - NTP Time Server with 2x 10/100/1000 MBit LAN Interface - V04.00

110 / 178

hopf

Elektronik GmbH

Nottebohmstr. 41

• D-58511 Lüdenscheid • Tel.: +49 (0)2351 9386-86 • Fax: +49 (0)2351 9386-93 • Internet: http://www.hopf.com • E-Mail: [email protected]

8.3.7.2 Set Sync Source Time

Adjustment of UTC including the date in the Sync Source (here Module 8024GPS)

After entering the plausibility of these values are directly checked by clicking on the

Apply

button and then sent to the Sync Source (here Module 8024GPS).

Always the UTC time must be set. The local time is internally calculated
from the difference time (Time Zone Offset) and the summer / winter time
changeover (Daylight Saving Time).

•

Year

Input of the current UTC year (2000-2099)

•

Month

Input of the current UTC month (01-12)

•

Day

Input of the current UTC day (01-31)

•

Hour

Input of the current UTC hour (00-23)

•

Minute

Input of the current UTC minute (00-59)

•

Second

Input of the current UTC second (00-59)

The input must be complete and according to the stated format.

Summary of Contents for 8030HEPTA/GPS



















































































































































































Search results

Summary of Contents for 8030HEPTA/GPS

Reviews:

Related manuals for 8030HEPTA/GPS

Brands by name

Popular brands

hopf Elektronik GmbH 8030HEPTA/GPS, Technical Manual

Search results

Summary of Contents for 8030HEPTA/GPS

Reviews:

Related manuals for 8030HEPTA/GPS

Brands by name

Popular brands