hopf Elektronik GmbH 8030HEPTA/GPS Technical Manual Download

Page: 94 / 178

HTTP/HTTPS

GUI

–

ROWSER

ONFIGURATION

NTERFACE

8030HEPTA/GPS GPS - NTP Time Server with 2x 10/100/1000 MBit LAN Interface - V04.00

94 / 178

hopf

Elektronik GmbH

Nottebohmstr. 41

• D-58511 Lüdenscheid • Tel.: +49 (0)2351 9386-86 • Fax: +49 (0)2351 9386-93 • Internet: http://www.hopf.com • E-Mail: [email protected]

If time server 8030HEPTA/GPS is not in operation during the whole announcing time, it is not
possible for the application to update its leap second file. The leap second file needs to be
updated next time when time server is put in operation.

On the following website

https://www.ietf.org/timezones/data/leap-seconds.list

a current version of the leap second file can be downloaded.

UTC-TAI offset

This field shows the actual value, that the PTP service uses, for the difference of UTC and TAI
time.

Date of Next Leap Second

This box shows if and if yes when the next leap second is going to be inserted.

Summary of Contents for 8030HEPTA/GPS



















































































































































































Search results

Summary of Contents for 8030HEPTA/GPS

Reviews:

Related manuals for 8030HEPTA/GPS

Brands by name

Popular brands

hopf Elektronik GmbH 8030HEPTA/GPS, Technical Manual

Search results

Summary of Contents for 8030HEPTA/GPS

Reviews:

Related manuals for 8030HEPTA/GPS

Brands by name

Popular brands