hopf Elektronik GmbH 8030HEPTA/GPS Technical Manual Download

Page: 119 / 178

HTTP/HTTPS

GUI

–

ROWSER

ONFIGURATION

NTERFACE

8030HEPTA/GPS GPS - NTP Time Server with 2x 10/100/1000 MBit LAN Interface - V04.00

119 / 178

hopf

Elektronik GmbH

Nottebohmstr. 41

• D-58511 Lüdenscheid • Tel.: +49 (0)2351 9386-86 • Fax: +49 (0)2351 9386-93 • Internet: http://www.hopf.com • E-Mail: [email protected]

8.3.7.12 H8 Firmware Update (Sync Source)

Patches and Bug Fixes are provided for the Time Server 8030HEPTA/GPS by means of up-
dates.

The H8 update of the Sync Source is loaded only via the web interface in the Time Server
8030HEPTA/GPS

(log in as “master” user required). See also

Chapter 4.4 Firmware Update

The following points should be considered regarding updates:

•

Only experienced users or trained technical personnel should carry

out a board update after checking all necessary preconditions.

•

Important:

Faulty updates

update attempts

may, under certain

circumstances, require the module to be returned to the factory for
repair at customer’s expense.

•

Is the update on hand suitable for the module? If there are any

doubts please consult the support of the

hopf

company.

•

In order to guarantee a correct update, the "

New version of saved

site

" function must be set to "

On each access to the site

" on the In-

ternet browser used.

•

During the update procedure, the device

must not be switched off

not

settings be saved to the flash memory

•

Updates are

always

carried out as Software SETs. That means that

all programmes included in the SET must be downloaded to the sys-
tem.

•

For the update pay attention to point described in

Chapter 4.4 Firm-

ware Update

In order to carry out an update, enter the name and the folder in which the update / firmware
image is located in the text field or open the file selection dialogue by pressing the "Browse"
button.

Summary of Contents for 8030HEPTA/GPS



















































































































































































Search results

Summary of Contents for 8030HEPTA/GPS

Reviews:

Related manuals for 8030HEPTA/GPS

Brands by name

Popular brands

hopf Elektronik GmbH 8030HEPTA/GPS, Technical Manual

Search results

Summary of Contents for 8030HEPTA/GPS

Reviews:

Related manuals for 8030HEPTA/GPS

Brands by name

Popular brands