Honeywell MAXPRO NVR SE, Operator'S Manual

Page: 41 / 80

. . . . .
C O N F I G U R I N G M A X P R O N V R
MAXPRO NVR Operator’s Guide
41
Note:
For live streaming, 30 FPS is the default frame rate in NTSC format and 25 FPS is
the default frame rate in PAL format.
• The Compression is defaulted to “ Medium ”. You can select a new Compression
ratio as applicable.
• The GOP is defaulted to “5”. Type a new GOP as applicable. Group of Pictures
(GOP) are individual frames (number of pictures) that are grouped together and
played back for viewing. A GOP consists of “IFrame” picture type that represents a
fixed image independent of other picture types. Each GOP begins with this type of
picture.
• Select the FPS for Background recording.
• Select the FPS for Event based recording.
Live/Recording Quality can be varied by controlling GOP. The formula for this is calculated
as follows: Recording Quality resulting FPS = Live FPS/(GOP*I Frame Number for
recording).
For example, in the following table if Live FPS is configured as “30” and Continuous
recording is set to record “Every I frame” and Event recording set to “Same as Live” with
GOP value set to “5” results in 6 FPS continuous recording quality and 30 FPS event
recording quality.
Note:
GOP value below 5 may not be achieved from all the cameras.
• Select the Event Recording clip deletion duration.
• Select the Background (Continuous) Recording clip deletion duration.
6.
Click Save .
Note:
If a particular camera is not discovered by the system, you can add it manually by
clicking
Add .
U
P D A T I N G T H E CAME RAS
You can modify the settings of a camera to change the camera name, IP address, camera
type, fixed/PTZ, advanced camera settings, and so on. You can update the camera settings
only if you have admin rights.