9. Getting ready to work with attachments
79
When the floating position is switched
1. Set the shift lever (A) at the rear in the "Tipping device*" position upwards.
2. Switch on master switch (11) for working hydraulics.
Lifting
1. Push button (1) and push the joystick (10) back at the same time. The tipping device* is lifted
proportionally. Guide joystick (10) back into the center position; lifting stops.
on, a lifted implement falls quickly or slowly to the ground, depending on the weight.
If you disregard these guidelines, there is a possibility of severe or fatal injuries.
ADVICE
The tipping system cannot be lifted if float position is activated.
Procedure
1. To activate, push button(28) on the foil keyboard; LED display in button (28) lights up,
i.e. the tipping device* will lower if lifted.
2. Deactivate the floating position by again pressing button (28); the red LED button indicator goes out.
* Optional equipment
Operating rear lift
Warning against improper use of the tractor
Prevent persons from being present in the danger zone of the rear end and the attachments when the
hydraulic equipment is in operation.
If you disregard these guidelines, there is a possibility of severe injuries.
Procedure
1. Set the shift lever (A) at the rear in the "Tipping device*" position upwards.
2. Switch on master switch (11) for working hydraulics.
Lowering
1. Push button (1) and push the joystick (10) forward at the same time. The tail lifting device* is
lowered proportionally. Guide joystick
(10) back into the center position; lowering stops.
Lifting
