9. Getting ready to work with attachments
69
Danger: Risk of accident from improper usage of the tractor
The tractor can tip if the inclination adjustment is operated when the front hydraulics are lowered. If you
disregard these guidelines, there is a possibility of severe or fatal injuries.
Note: Button 3 = serial joystick C 992. Button 4 = multifunctional joystick.
Inclination adjustment
1. Press button (3, 4) and move joystick (10) forward or backward at the same time. The tail lift
inclination changes.
2. The tail lift will remain in the selected position after button (3) is released.
Side control
1. Press button (3, 4) and move joystick (5) to the right or left at the same time. The side adjustment
of the tail lift changes.
2. The tail lift will remain in the selected position after button (3) is released.
Floating position inclination adjustment
DANGER: Risk of accident from improper usage of the tractor
Never stand underneath attachments or tipping systems. When the floating position is switched on, a
lifted implement falls quickly or slowly to the ground, depending on the weight. If you disregard these
guidelines, there is a possibility of severe or fatal injuries.
1. Push button (8) at the multifunction joystick or button (20) on the foil keyboard. Float switch is
switched on, LED display in button (20) lights up, i.e. the lift can be moved by outer effects.
2. Deactivate the float position by pushing the button (20) or by holding button (4, 3) at the joystick
and moving the joystick forward or back. LED display in button (20) goes out.
Operating a front-lifting attachment with keypad
This procedure provides instructions on how to operate a front-lifting attachment with the keypad.
Switch on master switch (11) for working hydraulics.
Lowering
Note: Use the dial switch (13) to determine the speed for lowering and lifting the front lift. Turn to the
left = slower. Turn to the right = faster.
1. Press key (16). LED-display in button (16) and (14) remains lit until the front lift has been
lowered completely.
2. Set the lowering speed with dial switch (13).
Lifting