9. Getting ready to work with attachments
70
1. Press key (15). LED-display in button (15) and (14) remains lit until the front lift has been lifted
completely.
2. Set the lifting speed with dial switch (13).
Note: Pushing the button (15, 16) again or moving the joystick (10) forward or back stops lowering or
lifting.
Floating position of the front lift
DANGER: Risk of accident from improper usage of the tractor
Never stand underneath attachments or tipping systems. When the floating position is switched on, a
lifted implement falls quickly or slowly to the ground, depending on the weight. If you disregard these
guidelines, there is a possibility of severe or fatal injuries.
1. To activate, press key (12). The LED indicator in button (12) lights up, i.e. the lift can be moved
by external effect.
2. Deactivate the float position by pushing the button (12, 15, 16) again or by actively lifting the
front lift via the joystick (10). LED in button (12) goes out.
Note: The float position can also be activated via the joystick, see page 227.
Danger:
Risk of tractor tipping over
The tractor can tip if the inclination adjustment is operated when the front hydraulics are
lowered. Disregarding this information could result in serious or fatal injuries, and damage to
the tractor.
To adjust the inclination of a front-lifting attachment:
l
Push and hold button (18) to tip the front lift to the right.
l
Push and hold button (19) to tip the front lift to the right.
l
Release the corresponding button to stop the movement.
Floating position of the inclination adjustment (?)
This procedure provides instructions on how to float position of the inclination adjustment
To float position of the inclination adjustment:
Danger:
Do not allow anyone to stand under or near raised attachments or tipping systems
(?). Failure to comply will result in serious or fatal injuries.
When the floating position is switched on, a raised attachment falls quickly or slowly to the
ground, depending on the weight.
