9. Getting ready to work with attachments
68
9 Driving direction reverse
10 Front light-out, plug-in coupling green
Operating the multi-function joystick (picture)
Special functions
Button 3: Quantity distributor II or power outlet, e.g. for additional valve on device (present to
customer's request). Power outlet to 7-pin socket to pin 2.
Button 4: Side/inclination control or switched via button (optional equipment) to separate power output
e.g. for spreader additional function.
Operating a front-lifting attachment with joystick
This procedure provides instructions on how to operate a front-lifting attachment with the joystick.
To operate a front-lifting attachment with the joystick:
Switch on master switch (11) for working hydraulics. Lamp in the switch (11) and LED display singly-
acting hydraulic function in button (17) is lit.
Lowering
Do not press any button, press joystick (10) forward and hold. The lift is proportionally lowered. Guide
joystick (10) back into the center position; lowering stops.
Lifting
Do not press any button, pull joystick (10) backward and hold. The lift is proportionally raised. Guide
joystick (10) back into the center position; lifting stops.
Floating position
Danger: Risk of accident from improper usage of the tractor
Never stand underneath attachments or tipping systems. When the floating position is switched on, a
lifted implement falls quickly or slowly to the ground, depending on the weight. If you disregard these
guidelines, there is a possibility of severe or fatal injuries.
Note: The float position can be activated at the multifunctional joystick either via button (4 or 7).
1. Push the button (3,) at the joystick or button (4, 7) at the multifunctional joystick or button (12) on
the foil keyboard. Float position is activated, the LED in the button (12) is lit, i.e. the attachment
lowers and can swerve due to outer effects during work.
2. Deactivate the float position by actively lifting or pushing the button (12) again. LED in button
(12) goes out.
