Hog Technologies Stripe Hog SK2000, Operation Manual

Page: 35 / 166

35 35
Stripe Hog Systems
the arm to the desired position. Then tighten the
jam nut to secure the arm.
The castor wheel mount assemblies are threaded
to provide spray bar/blasting head height adjust -
ment. T-handle adjustment rods attached to each
castor wheel assembly are used to rotate each
threaded shaft to move the wheels up or down.
The rods are designed to hold the castor wheel
adjustment and keep the blasting head at the
desired height. Blasting head height adjustment
should be checked before each shift and the wheel
castors should be inspected for damage and ex-
cessive wear daily. The castors and wheels should
be greased daily for maximum life expectancy.
Refer to the Operation and Maintenance sections
of this manual for additional information on the
operation and maintenance of the castor wheels
and blasting head assemblies.
NOTICE:
F O R M A X I M U M P R O D U C T I O N, S TA N D O F F D I S TA N C E
SHOULD NEvER BE MORE THAN ONE (1) INCH.
Tubular Head Plate Caster Wheels, Arms & T-Handle Pins
1. Adjustable Friction Plate 5. Castor Wheel Assembly Threaded Shaft
2. Friction Plate Bolt & Jam Nut 6. Castor Wheel Support Arm
3. T-Handle Pin 7. Castor Wheel Assembly
4. Height Adjustment Rod 8. Tubular Head Plate
3
4
6
5
1
2
8
7