Hog Technologies Stripe Hog SK2000, Operation Manual

Page: 131 / 166

131
Scheduled Maintenance
Step 4
Remove Swivel Tit Assembly/Gland Nut
While holding the thru-shaft with the 3/4” (19
mm) open end wrench through the slot in the mo-
tor base, use a 15/16 (24 mm) deep well socket
or box end wrench to remove the swivel tit as-
sembly/gland nut by turning it counterclockwise.
Inspect the gland nut for wear, damage or worn
O-ring inside. Replace the O-ring if it shows signs
of wear or is damaged. Check the swivel tit as-
sembly for wear and damage, then set it in a safe,
clean location. Figure 7 and 8.
Figure 7: Swivel Tit assembly/gland nut to be removed by turning counterclockwise with a 15/16” deep well socket or box
end wrench.
Figure 8: 3/4” (19 mm) open end wrench holding thru-
shaft and preventing it from turning while
removing swivel tit assembly/gland nut.
Swivel Tit Assembly/Gland Nut