Hog Technologies Stripe Hog SK2000, Operation Manual

Page: 65 / 166

65
Operation
5. Open the 4” ball drain valve on the passenger
side of the tank for several seconds to flush
out debris that may have accumulated on the
bottom of the tank, then close the valve.
6. Monitor the tank sight glass closely during
fill operations and close the source valve just
before the tank is completely filled.
7. Close the water tank fill valve, release the
cam-locks and disconnect the fill hose from
the fitting.
8. Remove the fill hose from the water source
and drain the hose.
9. Store the hose in a clean, safe location.
CAUTION
OPERATORS MUST ALWAYS MONITOR THE TANK CLOSELY
DURING FILLING OPERATIONS AS THE FLOW OF WATER
FROM A HYDRANT OR OTHER HIGH vOLUME SOURCE IS
FAR GREATER THAN THE FLOW CAPACITY OF TANK AIR
vENT. OvERFILLING THE TANK WILL CAUSE EXCESSIvE
PRESSURE AND DAMAGE THE TANK.
Clean Water Tank Fill Hose Connection & Valve
Clean Water Tank Sight Glass
Clean Water Tank Drain & Fill Valves