Hofmann Geodyna 8250p, Operation Manual

Page: 94 / 184

94
...
...
. .
...
...
.
...
...
. .
...
...
.
5-48
4-11
4-12
3
4
Operation “
MANUAL MODE
”
5.14.1 Saving a Wheel Profi le
Up to 9 wheel profi les can be saved.
—
Clamp the wheel you wish to save the profi le of.
—
Set and acquire all the wheel data, including the
number of spokes if an Alu P is required.
—
In the RIM DATA ENTRY screen press the
“SPECIAL” key (
Fig. 5-48
).
The WHEEL PROFILES screen is displayed (
Fig.
4-11
).
The current wheel profi le data are highlighted in a line
on its own at the bottom of the page.
—
In the 9 position list, use the Scroll command to
choose the current profi le registration position.
—
Press key (
3, Fig. 4-11
) to save data.
The data are now saved permanently in the chosen
position and can be recalled when required.
Note
: If the profi le is overwritten with other data it is
no longer shown in the list.
5.14.2 Recalling a Wheel Profi le from the
memory
—
Clamp the wheel to the balancer.
—
In the RIM DATA ENTRY screen press the
“SPECIAL” key (
Fig. 5-48
).
The WHEEL PROFILES screen is displayed (
Fig.
4-11
).
—
Type on one of the nine lines to select the profi le
indicated for the wheel being processed.
—
Press key (
4, Fig. 4-11
) to apply the selection.
The RIM DATA ENTRY screen will open (
Fig. 4-12
)
and show the data recalled.
—
Check that the settings in the Indications Field and
Status Bar panel are correct.
The machine is now ready to proceed with the
measuring run (
F
5.13).