Hofmann Geodyna 8250p, Operation Manual

Page: 22 / 184

22
4-6
6
7
5
8
9
11
2 3 1 4
10
12 12b
13
Layout
Fig. 4-6 RIM DATA ENTRY
Rim data entry Screen.
Open using
the Manual Data Entry
key (
3
,
Fig. 4-5
).
Specifi c commands:
1 -
HELP key
- Selects HELP texts.
2 -
HOME key
- Returns you to the starting page
(
INTRO SCREEN
).
3 -
SPECIAL
key -
Opens the WHEEL PROFILES screen page, for saving
or selecting wheels with pre-set dimensions (
F
5.8.3).
4 -
ESC key
-
-
Returns you to RIM DATA ENTRY
5 -
DISTANCE key
- (
OFFSET
) - To change the value
press one of the arrows.
-
The right arrow increases the value.
-
The left arrow reduces the value.
6 -
WIDTH key
- For changing the rim nominal width
value set.
-
The right arrow increases the value.
-
The left arrow reduces the value.
Note
: Rim width is displayed in 0.10” steps.
7 -
DIAMETER keys
- For changing the rim nominal
diameter value set.
-
The upper arrow increases the value.
-
The lower arrow reduces the value.
8 -
START key
- Starts the measuring run.
9 -
“INCH / MM” key
- For selecting alternatively
inches or millimetres, press directly on one of the
measurements shown.
10 -
“G / OZ” key
- For selecting readings in grams
or ounces.
11 -
“ALU” keys
- For directly selecting the positions
for application of weights on the rim.
12 -
“TOGGLE” key
- For activating the “Easy Alu
Toggle” (
F
5.8.2) option. After a fi rst selection the
key is no longer active and appears greyed out
(12b)
.
13 -
For manually entering wheel dimension
information
.
...
...
..
..