130
...
...
. .
...
...
.
...
...
. .
...
...
.
5-95
5-96
5-83
5-97
8
Operation
Message E9
Message
E9
means that at least one error has occurred
during the optimisation cycle (System messages
F
7.1).
—
Abort the optimisation program by pressing the
STOP
key and, if desired, start optimisation once
again.
Figure 5-95
MINIMISATION “
9
”
—
Clamp the wheel.
—
Position the valve so that it is exactly perpendicular
to and above the chuck.
—
Confi rm the valve position by pressing key
8
.
The MINIMISATION “10” screen appears (
Fig. 5-96
).
Figure 5-96
MINIMISATION “
10
”
START is signalled on the screen
—
Perform the wheel measuring run.
A measuring run is performed.
The BALANCING screen is displayed (
Fig. 5-83
).
Finish weight Minimisation
Figure 5-83
BALANCING
—
Balance the wheel according to the readings.
If the silent wheel running conditions cannot be
improved on, the following message is displayed:
Fig. 5-97
H0
Silent wheel running conditions cannot be
improved by optimisation.
Summary of Contents for Geodyna 8250p
Page 176: ...176 Blank Page ...