Hofmann Geodyna 8250p, Operation Manual

Page: 24 / 184

24
4-7
8 9
11 12
10
4 1 2 3
5 6 7
13
Layout
Fig. 4-7 BALANCING
Balancing Screen.
Open with
the BALANCING
key (
5
,
Fig. 4-5
)
.
Commands:
1 -
HELP key
- For selecting HELP texts.
2 -
HOME key
- Returns you to the starting page
(
INTRO SCREEN
).
3 -
START key
- Starts the measuring run.
4 -
ESC key
- To exit the option being executed or
displayed.
5 -
BALANCE key
- Returns you to the automatic
balancing program.
6 -
OPT/MIN key
- Starts the Optimisation / Minimisation
program.
7 -
SPLIT key
- Starts the procedure for splitting the
wheel weight, to be applied behind the spokes.
8 -
FINE key
- Increases the resolution of the values
shown, for reading remaining unbalances.
9 -
STATIC key
- For retrieving static balancing. Press
again to restore dynamic balancing.
10 -
LASER POINTER key
- Enables relocation of the
wheel weight in Laser Pointer mode. Press again to
confi rm the position change.
11 -
FREEZE WHEEL DATA key
- Size data for the
wheel being processed are saved so that they can be
used with subsequent wheels of the same size (set of
wheels). This allows a shorter run.
12 -
RIM DATA ENTRY key
- To go to the Rim data
entry screen page, and to Manual operation from
“Automatic”.
13 -
WAP key
- The key is at the imbalance value.
Press to automatically index the wheel to the weights
application position; the wheel starts to reach and stop
at the WAP position of that plane.
...
...
..
..