112
...
...
. .
...
...
.
...
...
. .
...
...
.
4-10
5-65
5-66
5-67
3
6
4
7
8
Operation
5.17.3 Start optimisation or weight
minimisation
Procedure:
—
Clamp the wheel or bare rim.
—
Enter correct rim dimensions, or check existing
inputs for correctness.
—
Close the wheel guard (if necessary press the
START
key).
—
Starting from the BALANCING Menu press key
6
Optimisation-Minimisation (
Fig. 4-10
).
The OPTIMISATION MENU screen “1” is displayed
(
Fig. 5-65
).
If an optimisation/minimisation result has already been
saved, press key
7
(
Fig. 5-66
); in this way, the program
continues from the step where it was interrupted, with
the relative measurement values and settings, and the
optimisation/minimisation may continue.
At this point, you can choose whether to continue with
Optimisation (Key
8
), or go to Minimisation (Key
4
).
5.17.3.1
OPTIMISATION
—
Clamp the rim only.
—
Move the gauge arm into position on the rim, based
on the desired ALU.
—
Perform a measuring run.
—
In the BALANCING Menu press key
3
(
Fig. 5-33
).
The “1” screen page appears (
Fig. 5-66
).
—
Press the menu key
8
(
Fig. 5-66
).
The OPTIMISATION “2” screen appears (
Fig. 5-67
).
Summary of Contents for Geodyna 8250p
Page 176: ...176 Blank Page ...
