50
5-8
5-7b
5-8b
Operation
5.2.2.1 Using the Automatic Lifter
(if present):
Fig. 5-8b
The lifter ascends automatically as soon as the
operator operates the pedal for wheel removal.
After removing the clamping tool from the shaft.
– Support the wheel, then move the platform out
of the shaft area, towards the right.
– Press and release the control pedal; the platform
will be completely lowered.
– Roll the wheel off the balancer.
5.2.2
Unclamping the wheel
Note
: While the jaws unclamp, support the wheel
WITH YOUR LEFT HAND
so that it will not tilt
when unclamped.
—
Lift the pedal (
Fig. 5-8
).
—
Remove the clamping sleeve from the chuck (
Fig.
5-7b
).
—
Remove the wheel.
...
...
. .
...
...
.
geodyna
8250p
Summary of Contents for Geodyna 8250p
Page 176: ...176 Blank Page ...