18
NOTE
: Pressing the [ESC] key will make the display go to the top of next function group,
regardless the display contents. (e.g.
[ESC]
)
Press the both up and down key at the same
time in func. code or data display, then
single-digit edit mode will be enabled.
ESC
SET
Group "d"
Func. code display
.
Group "F"
Func. code display
.
.
SET
SET ESC
SET ESC
Save
Group "A"
Func. code display
SET
SET ESC
SET ESC
Data display
When data is changed, the display
starts blinking, which means that
new data has not been activated yet.
: Saves the data in EEPROM and
returns to
func. code display
.
: Cancels the data change and
returns to func. code display.
SET
ESC
Group "b"
ESC
Func. code display
: Jumps to the next group
ESC
Func. code display
: Moves to
data display
SET
ESC
ESC
Data display
(F001 to F003)
Data does not blink because of real time synchronizing
: Saves the data in EEPROM
and returns to
func. code display
.
: Returns to func. code display without saving data.
SET
ESC
