19
[Setting example]
After power ON, changing from
.
display to change the
(Run command source)
data.
Function code
xxx
are for monitor and not possible to change.
Function codes
xxx
other than
are reflected on the performance just after changing the data
(before pressing SET key), and there will be no blinking.
Display is solid lighting.
.
Data of
will be shown on the
display after the first power ON
Press [ESC] key to show
the function code
Press [ESC] key to move
on to the function group
Press [ESC] key Once to move
on to the function group
.
Press Up key to change increase
function code (
)
Press SET key to display the data of
Press SET key to set
and save the data
When data is changed, the display
starts blinking, which means that new
data has not been activated yet.
ESC
SET
ESC
ESC
SET
ESC
:Fixes and stores the data and moves back to the function code
:Cancels the change and moves back to the function code
SET
ESC
SET
Press up key to increase the
data (
)
