70
“C” Function
A
B
Defaults
Func.
Code
Name
Description
Initial
data
Units
Logic output 1 operator
Applies a logic function to calculate [LOG]
output state,
Three options:
[LOG] = A AND B
[LOG] = A OR B
[LOG] = A XOR B
00
Logic output 2 operand A
All the programmable functions available
for logic (discrete) outputs except LOG1 to
LOG3, OPO, no
00
Logic output 2 operand B
00
Logic output 2 operator
Applies a logic function to calculate [LOG]
output state,
Three options:
[LOG] = A AND B
[LOG] = A OR B
[LOG] = A XOR B
00
Logic output 3 operand A
All the programmable functions available
for logic (discrete) outputs except LOG1 to
LOG3, OPO, no
00
Logic output 3 operand B
00
Logic output 3 operator
Applies a logic function to calculate [LOG]
output state,
Three options:
[LOG] = A AND B
[LOG] = A OR B
[LOG] = A XOR B
00
Input [1] response time
Sets response time of each input terminal,
set range is
(x 2 [ms]) to
(x 2 [ms])
for (0 to 400 [ms]).
1.
Input [2] response time
1.
Input [3] response time
1.
Input [4] response time
1.
Input [5] response time
1.
Input [6] response time
1.
Input [7] response time
1.
Multistage speed/position
determination time
Set range is 0. to 200. (x 10ms)
0.
ms
Overload warning
processing cycle select
Two option codes:
40ms
2ms
00
Overload warning filter
time constant
Set the filter time constant for output
current detection used for judgement of
overload warning.
Range is 0 to 9999 ms
0
ms
Overload warning
hysteresis
Set the hysteresis for overload warning
signal.
Range is 0 to 50% of the rated current of
the inverter
10.0
%
