Hitachi RWM-(H)FSN3E, Service Manual

Page: 156 / 424

5 Control system
SMGB0070 rev. 1 - 08/2011
146
User variables:
CODE REF Description Default Value
6-000 hsb Hydraulic Separator = ( Disabled, Enabled)
Automately enabled when boiler complementary hea-
ting selected
C A U T I O N
• Be sure that the boiler and the integration of the boiler with the YUTAKI S system is in accordance with relevant
European and national regulations.
• HITACHI can not be held responsible for incorrect or unsafe situations in the boiler system.
• Make sure that return water to the YUTAKI S heat exchanger never exceeds more than 57ºC.
• Make sure that the non-return valves (field supplied) are correctly installed in the system as shown in the
illustration above.
• Boiler bivalent point
Unit should be sized to operate mainly in heat pump mode. Given that capacity is reduced with temperature, it may be
desirable for the unit to use boiler accessory only when ambient temperature is low.
Boiler will only be enabled when:
Outdoor Ambient Temperature > Bivalent outdoor temperature for boiler (6-007)
20 [
6-007
] -20
Heat Pump
only
Boiler
Heat Demand
Heat pum
p capacity
Ta
CAP (kW)
-20 20
[ 6-007 ]
Heat Demand
Heat pump capacity
Heat pump
only
Boiler
Text (ºC)
User Variable:
CODE REF Description Default Value Range Steps Units
6-007 BB Bivalent outdoor temperature for Boiler -5 -20~20 1 ºC