Hitachi RWM-(H)FSN3E, Service Manual

Page: 203 / 424

6 LCD user’s interface
SMGB0070 rev. 1 - 08/2011
193
6
6.6 Installer access
A special user with higher access privileges can use the controller to configure the system.
This user is referred to as the Installer, and in order to access the controller as Installer, you must hold down the OK and
Return buttons for 3 seconds.
OK + RETURN
After that, the “Enter the password combination” message will appear.
The password combination for the Installer is:
Right ( ), Down ( ), Left ( ), Right ( ).
Press Ok to confirm the password.
If the correct access code is entered, the installer mode icon will appear on the notifications bar (bottom line).
Installer mode icon
Installer level access remains active for 30 minutes. After that time, it is necessary to repeat the log in process. To exit the
Installer mode and return to the unit menu, hold down the backspace for 3 seconds or go to the logout option on the menu.
N O T E
The following chapters will explain the special settings the Installer can edit. It is important to understand that
the Installer can also perform all the actions available to other users.