Hitachi RWM-(H)FSN3E, Service Manual

Page: 373 / 424

12 Troubleshooting
SMGB0070 rev. 1 - 08/2011
363
12
Alarm code
22
Abnormal operation of the thermistor for the outdoor temperature (outdoor unit ambient
thermistor)
• The RUN LED flickers and “ALARM” is displayed on the remote control switch.
•
The unit number, the alarm code and the unit code are alternately displayed on the set temperature section.
The unit number and the alarm code are displayed on the display of the outdoor unit PCB.
- This alarm code is displayed when the thermistor is short-circuited (less than 0.2 kΩ) or cut (greater than 500 kΩ)
during the operation. However, this alarm occurs during the test run mode only. In the case that the thermistor is
abnormal during the operation, the operation continues based on the assumption that the outdoor temperature
is 35 °C (cooling) / 6 °C (heating).
Is the thermistor THM7
(TA) connected to PCB1?
Connect it
No
Yes
Is the resistance of
THM7 between 0.24 kΩ
and 500 kΩ?
Faulty thermistor
No
Yes
Faulty PCB1
Outdoor temperature thermistor
90
80
70
60
50
40
30
20
10
0
-15 -10 -5 0 5 10 15 20 25 30 35 40 45 50 55 60
Thermistor characteristics
Ambient Temperature (ºC)
Thermistor
resistance
(kΩ)
Outdoor unit
ambient
thermistor
Phenomenon Cause Check item
Action
(Turn OFF the main switch)
Faulty ther-
mistor for the
outdoor unit
ambient
Fault Check resistance Replace thermistor if faulty
Incorrect connection Check wiring to PCB1 Repair wiring and connections
Faulty PCB1
Replace PCB1 and
check operation
Replace PCB if faulty