Hitachi P1-00041HFEF, Basic Manual

Page: 84 / 131

4-36
Chapter 4
For parameter configuration
[Input terminal function list]
Functio
n code
Symb
ol Function
name
Description
000 no
Not use
-
001 FW
Forward rotation Activating (ON) only one of them
will grant forward or reverse
rotation command.
⇒
[AA111]
002 RV
Reverse rotation
003 CF1
Multi speed
selection 1
Changing the states of these
terminals, allows to set different
motor speeds and change among
them.
⇒
[Ab110]
～
[Ab-25],
[Ab210]
004 CF2
Multi speed
selection 2
005 CF3
Multi speed
selection 3
006 CF4
Multi speed
selection 4
007 SF1
Multi speed Bit-7
008 SF2
Multi speed Bit-2
009 SF3
Multi speed Bit-3
010 SF4
Multi speed Bit-4
011 SF5
Multi speed Bit-5
012 SF6 Multi speed Bit-6
013 SF7
Multi speed Bit-6
014 ADD
Trigger for
frequency
addition[Ab105] When is turned ON, adds the
specified frequency value.
⇒
[AA106]
015
SCH
G
Speed reference
change
Main speed(OFF)/Sub-speed (ON),
to change between them use
⇒
[AA105].
016 STA
3-wire Start
If [STA] is ON, start the motor. If
[STP] is ON stop the motor.
Forward operation direction if [FR]
is (OFF), reverse operation direction
if is (ON).
⇒ [AA111]
017 STP
3-wire Stop
018 FR
Forward Over
Travel
019 AHD
analog command
holding
When the Analog inputs Ai1,2,3 are
in use, if AHD terminal is in ON
state, holds the Analog terminal
value.
⇒ [AA101]
020 FUP
Remote control
Speed-UP
function
If the frequency can be set ([AHD]
ON included), [FUP] ON accelerates,
and [FDN] ON decelerates. [UDC]
returns to the saved value.
⇒
[CA-62]
～
[CA-66]
021 FDN
Remote control
Speed-DOWN
function
022 UDC
Remote control
data clearing
023 F-OP
Force operation
If ON, switch set parameters.
⇒ [CA-68],[CA-69]
024 SET
2nd-motor
control
Change between 1st-motor (OFF)
and 2nd-motor (ON).
⇒
By parameter
028 RS
Reset Reset trip
⇒
[CA-61],[bb-41]
029 JG
Jogging
Activates Jogging operation.
⇒ [AG-20],[AG-21]
030 DB
External Dynamic
brake Enables the DC braking operation ⇒
[AF101]
～
[AF109]
031 2CH
2-step
Acceleration/Dec
eleration
If ON, changes the Acc/Decel time.
⇒
[AC115]
032 FRS
Free run stop
If ON allows the motor to free run.
⇒
[AA115],[bb-40]
033 EXT
External fault
If ON error E012 occurs.
⇒
Trip E012
034 USP
unattended
start protection
ON if at the start-up, the RUN
command was issued right at the
start up, E013 error.
⇒ Tripping E013
035 CS
Commercial
Supply change
When changing to the public
electric grid, if it is ON, will cut the
output.
036
SFT
Soft-Lock
If ON, disables parameter changes.
⇒ [UA-21]
037
BOK
Answer back
from Brake
Here is inputted the brake
confirmation signal for the brake
control.
[Input terminal function list]
Function
code
Symbol Function name Description
038 OLR
Accumulation
input power
clearance Switches between Overload limit
1(OFF) and 2(ON).
⇒
[bA122]
～
[bA128]
039 KHC
Accumulation
output power
clearance If ON, clears the Accumulated input
power monitor.
⇒
[UA-14]
040
OKHC
Disable PID1 If ON, clears the Accumulated
output power monitor.
⇒
[UA-12]
041 PID
PID1
integration
reset If ON, disables PID1 and changes
the PID target value for the
frequency reference.
⇒
[AH-01]
042 PIDC
Disable PID2 If ON, clears the integral value of
the control.
⇒
[AH-62],[AH-65]
043 PID2
PID2
integration
reset If ON, disables PID2 and changes
the PID target value for the
frequency reference.
⇒
[AJ-01]
044
PIDC2
Disable PID3 If ON, clears the integral value of
the control.
⇒ [AJ-14]
046
PID3
PID3
integration
reset If ON, disables PID3 and changes
the PID target value for the
frequency reference.
⇒
[AJ-21]
046
PIDC3
Disable PID4 If ON, clears the integral value of
the control.
⇒
[AJ-34]
047 PID4
PID4
integration
reset If ON, disables PID4 and changes
the PID target value for the
frequency reference.
⇒
[AJ-41]
048
PIDC4
Multi set-point
selection 1 If ON, clears the integral value of
the control.
⇒ [AJ-54]
051 SVC1
Multi set-point
selection 2
The target value can be selected by
changing the pattern of ON/OFF
states.
⇒
[AH-06]
052 SVC2
Multi set-point
selection 3
053 SVC3
Multi set-point
selection 4
054 SVC4 PID gain change
055 PRO
PID output
switching 1 Switches between Gain 1(OFF) and
Gain 2(ON).
056 PIO
PID output
switching 2 Switches PID Output 1 to 4 by
(PIO1:PIO2).
PID1 Enable(OFF:OFF)
PID2 Enable(OFF:ON)
PID3 Enable(ON:OFF)
PID4 Enable(ON:ON)
057 PIO2
SLEEP condition
ativation
058 SLEP
WAKE condition
ativation In case it is used in Sleep terminal
functions, when ON, it activates.
⇒
[AH-85]
059
WAKE
Torque limit
enable In case it is used in Wake terminal
functions, when ON, it activates.
⇒
[AH-93]
060 TL
Torque limit
selection bit 1
If ON, enables torque limit.
061 TRQ1
Torque limit
selection bit 2
The target value can be selected by
changing the pattern of ON/OFF
states.
062
TRQ2
Accumulation
input power
clearance