Hitachi P1-00041HFEF, Basic Manual

Page: 55 / 131

4-7
Chapter 4
For parameter configuration
4.1.5 Copying data
Data can be stored in the keypad and then copied to
other inverter unit. It is strongly recommended to backup
the data just in case.
Refer to user’s guide for a more detailed explanation.
① Select R/W from menu
Home Option
46.49
oFW
STOP
M1
M01
Menu
01 Scroll mode
02 Read / Write
03 System setting
②.”Read” function is used for storing the data from the
inverter to the keypad.
②’ 2-2. “Write” function is used for copying the data
stored in the keypad to the inverter
(Sequential writing function is used for copying the
data one after another)
Back ----
46.49
oFW
STOP
M1
R01
Read / Write
01 READ
02 WRITE
For more information, refer to the user’s guide.
4.1.6 Automatic functions of the keypad
With the system configuration, you can set and adjust
keypad related parameters.
Home ----
46.49
oFW
STOP
M1
M01
Menu
01 Scroll mode
02 Read/Write
03 System setting
・
Available actions in the system configuration
Name Memo
Language selection Change the language.
Date function *1) Time setting, display format, and
the settings for the battery
warning.
Read lock Limits the reading property of the
data.
R/W write mode Change the R/W data
parameters.
Home automatic
transition timer Sets the time for the automatic
home screen return function.
Initial home screen
selection Sets which screen is displayed at
the home screen when turns-on.
Brightness Adjust the brightness of the
keypad.
Auto backlight-off
function *2) Set the turn-off time and
brightness.
Blinking at trip Sets the screen blinking when
trips.
Background color Set the background color.
Basic information monitor Check the software information.
Keypad mode
Use this setting when connecting
to older models.
Keypad version Display the keypad version.
Keypad initialization Initialize the keypad
Self-diagnostic mode Will be executed Self-diagnostic
mode.
*1) Battery is required to use date function.
Recommend: Hitachi Maxwell CR2032, 3V
The battery is to be replacing every two years while the
inverter is power off.
*2) The auto backlight-off function will deactivate during
in trip status until trip reset. For more information, refer
to the user’s guide.