70
Chapter 1 Error Codes
7110 8625 The
P-VOL(S-VOL)
and S-VOL(T-VOL) have the
same number.
Check the specified volume number.
I
0
7110 8626
The Simplex command was rejected, because the
high-speed Split was in progress.
After the high-speed Split is completed, retry the
operation.
I 0
7110 8627
The Reverse Resync command was rejected,
because the high-speed Split was in progress.
After the high-speed Split is completed, retry the
operation.
I 0
7110 8629
The status mode specification is invalid.
I
0
7110 8630
The status mode type is invalid.
I
0
7110 8631
The specified CU number is invalid.
I
0
7110 8632
The timing of issuing the command is invalid.
Contact Hitachi Data Systems Support Center. I
0
7110 8633
The abnormal status is invalid.
Contact Hitachi Data Systems Support Center. I
0
7110 8634
The volume specified as a reserved volume is already
defined as a reserved volume for hierarchical control.
Change the volume number in order to specify
the Reserve volume.
I 0
7110 8635
The specified S-VOL is defined as a reserved volume
for hierarchical control.
Change the volume number in order to specify
the Reserve volume.
I 0
7110 8636
The specified T-VOL is defined as a reserved volume
for hierarchical control .
Change the volume number in order to specify
the Reserve volume.
I 0
7110 8637
The specified S-VOL is used as a destination volume
for hierarchical control.
Change the volume number in order to specify
the Reserve volume.
I 0
7110 8638
The command was rejected, because the target S-
VOL has FlashAccess settings.
You cannot execute the specified operation.
Release the FlashAccess setting for the
operation.
I 0
7110 8639
The command was rejected, because the target T-
VOL has FlashAccess settings.
You cannot execute the specified operation.
Release the FlashAccess setting for the
operation.
I 0
7110 8640
The command was rejected, because a pair sharing
the same S-VOL was in the Reverse Copy status.
You cannot execute the specified operation.
Release the Reverse Copy for the operation.
I 0
7110 8641
The pairs contain a pair in the Reverse Copy status. You cannot execute the specified operation.
Release the Reverse Copy for the operation.
I 0
7110 8643
The request was rejected, because the Reverse Copy
request was made to a pair in the non-Split status.
You cannot execute the specified operation.
Release the Reverse Copy for the operation.
I 0
7110 8644
The request was rejected, because the pair is not in
the Split/Suspend status.
Check the pair status.
I
0
7110 8645
The Reverse Copy request was rejected, because the
S-VOL was shared with a secondary volume of a
Remote Copy pair.
You cannot execute the specified operation.
Release the Remote Copy pair for the operation.
I 0
7110 8646
The Reverse Copy request was rejected, because the
S-VOL was shared with a Remote Copy pair in the
non-suspend status.
Delete the Remote Copy pair.
I
0
7110 8647
The Reverse Copy request was rejected, because the
T-VOL was shared by a Remote Copy pair.
Delete the Remote Copy pair.
I
0
7110 8648
The boot device and the S-VOL do not match in the
AddPair command.
Check the specified volume number.
I
0
7110 8649
Because the boot device is the T-VOL in the
DeletePair command, the flag does not match.
Check the specified volume number.
I
0
Summary of Contents for Freedom Storage Lightning 9900 V series
Page 1: ...Hitachi Freedom Storage Lightning 9900 V Series Remote Console Error Codes ...
Page 2: ......
Page 6: ...vi Preface ...
Page 8: ...viii Contents ...
