Hitachi Lightning 9900™ V Series Remote Console Error Codes
13
0003 3000
An error occurred. If this problem persists, please call
the Support Center.
When a path is set (add/delete), the maximum
value you can set in the PORT is exceeded. The
error does not occur normally because it is
guarded in the screen. Contact the program
maker.
E 2
0003 3001
An error occurred. If this problem persists, please call
the Support Center.
When CHA high-speed mode is set, multiple
change instructions are set to the same PORT.
The error does not occur normally because it is
guarded in the screen. Contact the program
maker.
E 2
0003 3002
An error occurred. If this problem persists, please call
the Support Center.
When Virtual LVI/LUN operation (Volume
Initialize) is performed, CV is not set in the target
logical parity group. The error does not occur
normally because it is guarded in the screen.
Contact the program maker.
E 2
0003 3003
An error occurred. If this problem persists, please call
the Support Center.
When host group is set (add/change/delete), the
maximum value you can set in the PORT is
exceeded. The error does not occur normally
because it is guarded in the screen. Contact the
program maker.
E 2
0003 3004
An error occurred. If this problem persists, please call
the Support Center.
When PORT information (Fibre Address/Fibre
Topology/Channel Speed) is set, multiple change
instructions are set to the same PORT. The error
does not occur normally because it is guarded in
the screen. Contact the program maker.
E 2
0003 3005
An error occurred. If this problem persists, please call
the Support Center.
When WWN is registered in LUN-Security
operation, the number of WWNs you can register
is exceeded. The error does not occur normally
because it is guarded in the screen. Contact the
program maker.
E 2
0003 3006
An error occurred. If this problem persists, please call
the Support Center.
When WWN is set (add/change), the maximum
value you can set in the PORT is exceeded. The
error does not occur normally because it is
guarded in the screen. Contact the program
maker.
E 2
0003 3007
An error occurred. If this problem persists, please call
the Support Center.
When you perform Virtual LVI/LUN (Volume
Initialize), only Deleted Normal Volume
information is specified. The error does not occur
normally because it is guarded in the screen.
Contact the program maker.
E 2
0004 2006
An error occurred. If this problem persists, please call
the Support Center.
Call the service personnel.
E
2
0004 6037
The subsystem status is invalid. Please call the
Support Center.
Call the service personnel.
E
2
0004 8010
The subsystem status is invalid. Please call the
Support Center.
Retry the same operation several times. If the
same error occurs, call the service personnel.
E 2
0005 5099
An error occurred. If this problem persists, please call
the Support Center.
You are trying to perform LUN Security operation
for non-Fibre port. The error does not occur
normally because it is guarded in the screen.
Contact the program maker.
E 2
0005 5200
This functionality is not available. SNMP API is
required.
Install the program product.
E
6
Summary of Contents for Freedom Storage Lightning 9900 V series
Page 1: ...Hitachi Freedom Storage Lightning 9900 V Series Remote Console Error Codes ...
Page 2: ......
Page 6: ...vi Preface ...
Page 8: ...viii Contents ...
